Medical Doctor

Medical Specialty

Primary Care


The Top 5+ Things to Consider Before Buying a Cooling Mattress Topper
What is the best mattress topper? There are a ton of factors to figure out when purchasing a cooling topper. From the resting position to materials, below are probably the most significant things you had better consider when you buy.
1. Cooling Characteristics
The most apparent approach to keep up temperature impartiality is by leveraging materials that enable airflow, which hence diverts the heat from your body while you are sleeping. A couple of toppers achieve so with the utilization of materials with breathability, such as open-cell foams, latex, and all that. Other models include a circulated-air-through construction that boosts the circulation of air.
When it comes to materials innately inclined to holding heat, producers must count on other ways. These may be copper, gel, or charcoal infusions intended to take heat away from your body. A few  best mattress topper brands include phase-change materials for temperature regulation through retaining, putting out, and getting rid of heat.
2. Sleeping Position
As you can see, the topper will position on your bedding’s top, so it is imperative to pick a model with the proper firmness to oblige the type of your body and your position of sleeping.
When it comes to side sleepers, they typically pick a plusher surface with the ability to lessen pressure points; that is why they should count on a thicker mattress topper to generate support for your shoulders and hips.
For stomach sleepers, they ought to be okay with a thinner, firmer model — meanwhile, those who sleep on the back fall in the spectrum’s middle.
3. Decent Materials
Wool toppers and latex ones provide the best life span; they can last about three years or four.
Meanwhile, a bad quality memory foam mattress toppers are likely to create perpetual body indentations before their life span ends.
In the case of the models with higher-density memory foam or polyfoam, they tend to last in a more extended time when compared to the lower-density ones in the same category, yet they will, for the most part, trap more heat.
Speaking of feather and fiberfill mattress toppers, those products are genuinely high-upkeep and ask for regular fluffing so that they will not lose loft after some time. They can last about two years or three.
4. The Level of Firmness
The primary explanation people buy the Top Rated Mattress Toppers is to change their mattress’s firmness level. As a rule, side sleepers and lighter sleepers are most appropriate to plusher models. For those sleeping on the stomach and those who are heavier, they are most relevant to firmer product units.
5. Thickness
In general, toppers quantify somewhere in the range of two and four inches thick. Those who apply more weight on the bedding, for example, side sleepers and heavier people, had better rely on a thick topper, which can deal with the additional load without reaching as far down as possible.
6. Pressure Relief
In case you do not know, memory foam is considered the most excellent material for pressure alleviation because it boasts close-conforming capacities. Nonetheless, in the event that you overheat with it, you may want to count on a latex mattress topper. This material tends to have similar pressure-easing characteristics to memory foam, and it has better breathability and generates a looser body cradle.
In Short
Be sure you refer to the key factors above before you buy the Best Rated Mattress Topper. They should help narrow down your options and make your purchasing experience more comfortable.

Email Console

Are you a Doctor, Pharmacist, PA or a Nurse?

Join the Doctors Lounge online medical community

  • Editorial activities: Publish, peer review, edit online articles.

  • Ask a Doctor Teams: Respond to patient questions and discuss challenging presentations with other members.

Doctors Lounge Membership Application

Tools & Services: Follow DoctorsLounge on Twitter Follow us on Twitter | RSS News | Newsletter | Contact us